gear durability

[aero-hiker]

I am starting to think about attempting a thru, not sure when yet due to logistics/career/money concerns, but I love to travel fast and am starting to plan a UL thru-hike.

I am wondering, however, how many pairs of trail runners, and hiking shorts/shirts I can expect to go through. In the past I've always hiked with boots, but have recently started adopting trail runners and have really enjoyed the change. Since trail runners wear out more quickly, how many miles should I plan on getting out of each pair? Also if I hike in running shorts (when the weather is nice) and a target/champion brand synthetic shirt, how long do you think I should plan for those to last?

Obviously, accidents can happen where the shirt/shorts get caught on something and rip, but short of that, do you think one set could get through the whole AT? I'd like to get all my gear and resupply gear together in advance to try to avoid unnecessary shopping trips in trail towns.

[Venchka]

From my unscientific method of reading posts here at WhiteBlaze, 400 miles, give or take, to walk holes in the soles.
However, in my more scientific readings about running shoes in general, the foundations are probably shot after 200 miles.
Vasque walking/hiking shoes may hold up longer.
YMMV.

Wayne

[Water Rat]

Your mileage will definitely vary...when it comes to shoes. My Salomons have a lot more than 400 miles on them and they still have plenty of traction remaining. I hike around on the roots and rocks of the northeast, ford rivers, and am usually scampering in tougher terrain. While I don't baby my shoes, I am not one who wears them out very fast.

There are too many variables for anyone to accurately answer your question of how many pairs of shoes. Personally, I would not buy a bunch of shoes before the hike if you are just making the transition to trail runners. Your feet might change size, you might decide the shoes that seemed comfortable don't actually work for you... If you have someone handling your resupply boxes leave them with some money (and the location of where you would like shoes purchased) and then contact them when you are getting close to needing more shoes. You might find you are not wearing through your shoes as quickly as other people.

Your weight, how you walk/run, the weight on your back.... Those are all things that will go toward dictating how long your shoes last. Oh, and the actual shoe itself.

As for shorts and shirts. It is possible to make it through an entire hike with the same shorts and shirt. Might be wise to pick up a backup set just in case...

[QiWiz]

I have 4E feet so use New Balance trail runners that I can get in EEEE width. I get about 400-600 miles out of a pair, so you might get by with 4 pairs for the AT. You might need a second or third pair of running shorts and/or hiking shirt, that to me is less predictable. For socks I would budget as many pairs of Darn Tough socks as I do trail runners, assuming I alternate the pair I wear with the pair I wash out and have hanging from my pack to dry.

[Dogwood]

I am starting to think about attempting a thru, not sure when yet due to logistics/career/money concerns, but I love to travel fast and am starting to plan a UL thru-hike.

I am wondering, however, how many pairs of trail runners, and hiking shorts/shirts I can expect to go through. In the past I've always hiked with boots, but have recently started adopting trail runners and have really enjoyed the change. Since trail runners wear out more quickly, how many miles should I plan on getting out of each pair? Also if I hike in running shorts (when the weather is nice) and a target/champion brand synthetic shirt, how long do you think I should plan for those to last?

Obviously, accidents can happen where the shirt/shorts get caught on something and rip, but short of that, do you think one set could get through the whole AT? I'd like to get all my gear and resupply gear together in advance to try to avoid unnecessary shopping trips in trail towns.

The short answer, as a generalization, is about 3-6 pr of light wt trail runners. Lots of variables though as WaterRat pointed out. One person's experience with one pr of different trail runners may not be what you experience.


I get added life from my tail runners when used for LD hiking by keeping them clean of funk and microbial odors and switching out crappy stock swiss cheese footbeds with a after market orthotic/footbed that is anti-microbial and more supportive for my feet characteristics.


IMO, in general, the lighter the wt the pr of trail runners the faster to the garbage can they are.


Be careful buying a whole bunch of shoes ahead of time as things like your foot size can increase as you are increasingly on your feet.


You'd prolly get away with two pr of shorts but I'd have a third in the resupply pipeline. Those Starter, Champion, etc 100% polyester shirts work but unless in expect to hike in tatters I'd have at least two more tees in the resupply pipeline.


If this is your first really LD hike know you will evolve as a backpacker and hence also gear knowledge. As these evolve it will have an effect on what gear choices you desire.

[donthaveoneyet]

Jeez, I've easily got 400 miles on my Asolo TPS 520 GV's, and I don't even consider them fully broken in yet. I had no idea these trail runner shoes were so short-lived. Backpacking boots should last a lifetime, subject to repairs and re-soling. YMMV (ha ha).

[MuddyWaters]

Depends on what you walk on. Rough sharp rocks eat shoes up. Soft dirt, doesnt do much harm.

[Pilgrim7]

I realize everyone has there own preference for shoes, but you may want to check out Vasque Juxt. I recently go a pair and they are amazing fresh out of the box.

They fit and feel like a trail runner,but are tough and durable like a boot. I now where them 24/7, Work, Church, and Trail.

[aero-hiker]

I get added life from my tail runners when used for LD hiking by keeping them clean of funk and microbial odors and switching out crappy stock swiss cheese footbeds with a after market orthotic/footbed that is anti-microbial and more supportive for my feet characteristics.

Any recommendations for aftermarket orthodic/insole/footbeds?

[Dogwood]

Any recommendations for aftermarket orthodic/insole/footbeds?

https://secure.yoursole.com/us/mens/...ture-karnazes/


Pricey, up front, I know, but here are the trade offs that in the long run pay off IMO: microbial(helps control odor, bacterial, and fungal issues with not only the shoes but being transported to your feet, nails, etc), support my high arch high volume instep and 190 lb body wt, have a decent heel cup, which IMO is not common to find in many trail runners off the shelf w/ stock footbeds, absorb underfoot shock, create added underfoot protection when choosing very flexible thinner trail runners, always outlast any trail runner I've ever had with them being rewashable and reusable in new trail runners, in some ways extend the reasonably usable life of my trail runners, have insulative properties which are helpful in colder weather to keep my feet warm, don't readily absorb heavy wetness. IMO, the SOLE footbed orthotics last longer and are more supportive of my feet characteristics than Superfeet footbeds.


The second most recommended after market orthotic footbeds , with many of the same product characteristics as the SOLE ones mentioned are, the SofSole FIT series.



https://www.sofsole.com/category/INSOLES

[peakbagger]

Funny I rarely wore out my soles on trail runners, I usually wear holes in the sides of them where my little toe pushes against the shoe.

I love my montrail heat moldable inserts. I just went backpacking and hiking for five days in Baxter (very abrasive hiking) with a new pair of trail runners right out of the box by putting in the inserts. I think I have gone through three pairs of trail runners on my current insoles.

[MamaBear]

I went through 5 pair of trail runners on my thru-hike, La Sportiva Ultra Raptors. I got about 400 miles out of each pair. One thing to think about is not only that the traction/outsole wears out, but that the inner supports will wear out. In my case, the inside supports usually are done before the outer part. My last two pair of shoes only had about 350 miles or so on them. I saved them and are finishing them off now that I am back home. I got my last pair at Franconia Notch just because being from New England, I know how the rocks here can really tear up shoes and feet and it was nice to have a new pair for the last 350 miles or so.

Socks, not sure, that is a personal choice. Socks can also break down, lose their loft, plus just never quite get as clean as one would like. I did wear through a few pair of Wrightsocks, but I mainly replaced my socks because it was really nice to have new socks! I started with old ones, and replaced as needed/wanted.

I went through three shirts on the AT. I invested in and wore Icebreaker. The first lasted about 700 miles, the second from Daleville, VA until Manchester Center, VT, and that was wearing the same shirt day in, day out and washing it about once a week. The last one I still have and am still using. My hiking companions also wore Icebreaker shirts and one of them wore the same shirt from Springer to Dalton, MA, where he finally had to throw it away as it had ripped out too much at the shoulders. Icebreaker is wool and one thing about wool is that is doesn't stink as much or retain odors nearly as badly as the synthetics. Even after washing, some of those synthetics don't smell like they've been washed.

As far as shorts, I went cheap on those. I had a pair of cheap running shorts from Wal-mart that survived the Long Trail, plus day hiking in the Whites and section hiking from Gorham to the Bigelows. I started with those and they lasted until Harper's Ferry, where I finally got rid of them. They were nylon and just not getting as clean as I'd like in the wash and were getting thin on the backside, plus I had chafe issues and needed to start using a compression short/short combo. Might as well get new stuff! One of my hiking companions wore Arcteryx shorts. Very expensive, but they always looked brand new! I have no idea what they make those shorts out of, but those things always looked good. Do remember, too, that if you have any weight to lose, you might need new shorts along the way.

[garlic08]

Different people have different tolerances on shoe breakdown. They start loosing cushioning right away, and some people feel it after a couple hundred miles. If you don't need the cushioning, or can add cushioning insoles, many shoes can be made to last 700 to 800 miles or more before the fabric uppers completely tear out, or there's noticeable sole wear. I went through three pairs of NB trail runners on my AT hike. I had to get a fourth pair shipped to Monson (mile 2000+), but that pair lasted well after the hike. (Mud and rocks in New England tore up and wore out the pair I had hoped to finish in.)

Other than shoes, I replaced two pairs of socks on my AT hike, replaced a rain jacket I didn't like, and replaced a headlamp I lost. All that cost less than $100.

If this is your first long hike, you'll probably replace gear more because you want to rather than wearing things out. You'll see lots of people with different stuff you'd like to try out. I don't think many first-time hikers end with exactly the kit they started with. Some even completely refit to the tune of four figures in the first thirty miles.

I'll repeat the caution about buying shoes ahead of time. You probably don't know which shoes and size will work for serious and loaded hiking, week after week. It's easy enough to buy and/or get shoes shipped to you along the way. And I hate to say it, but there's no guarantee you'll last longer than your first pair of shoes, anyway.

[CarlZ993]

I used 4 pairs of Brooks Cascadias on my thru-hike. My last pair that I replaced was in Andover, ME & it was held together w/ bailing wire & duct tape. Waited too late to replace them.

1st = Daleville (723.5M w/ some practice miles before hand)
2nd = Vernon, NJ (1352.6M; 630.1M in the shoes)
3rd = Andover, ME (1939.1; 578.5M in the shoes)
4th = finished last portion of the hike & then some

[aero-hiker]

what are the notations about resupply in your signature spreadsheet, CalZ993?

[theoilman]

Any recommendations for aftermarket orthodic/insole/footbeds?

I use Vionic inserts www.vionicshoes.com (yes they sell just the inserts, available in both full length and 3/4 length)
They seem to be as good as the ones from my podiatrist.

[Neemor]

It also depends on how you time getting your new shoes. If you go 300 miles before hitting PA then do PA. You will need a new pair at the end of the state.

If you get a new pair as you enter PA. You will still need a new pair at the end of the state. Lol.

[Patrickjd9]

Your mileage will definitely vary...when it comes to shoes.
----------------
Your weight, how you walk/run, the weight on your back.... Those are all things that will go toward dictating how long your shoes last. Oh, and the actual shoe itself.

Between weight and wearing the outsides of the heels, I only get 400 miles or so out of a pair of Vasque or Keen leather boots.

[Traveler]

For what its worth, I track a lot of stuff when I hike, including wear and tear on various gear. This is what I have on footgear averages.

Trail surfaces for all footgear are similar to conditions one would expect to find in an AT hike. Replacement criteria is when the shoe wear to the point tread grip is compromised; holes worn through to the exterior of sides or toe area or tongue/lacing platform torn or require modifications to use.

New Balance 1340's (trail runner) - approximately 350 - 400 miles
Merrell Moab Waterproof (trail shoe) - approximately 500 - 600 miles
Asolo 520 (backpacking boot) - approximately 1,400 - 1,600 miles

Use differences in weight loading, stride, how one lifts/sets their feet will affect these averages along with what you would use as replacement criteria, but this should give you an idea of what you can get in terms of foot wear ranges.

[aero-hiker]

Thanks for the great insight everyone! I may need to start a new thread for this, but concerning in-soles/orthodics etc. do you generally remove the removable insole provided by the manufacturer when adding an aftermarket one, or do you place the second one on top of the manufacturer provided one?