WhiteBlaze Pages 2024
A Complete Appalachian Trail Guidebook.
AVAILABLE NOW. $4 for interactive PDF(smartphone version)
Read more here WhiteBlaze Pages Store

Page 3 of 3 FirstFirst 1 2 3
Results 41 to 49 of 49
  1. #41
    Registered User
    Join Date
    03-25-2014
    Location
    Westchester County, NY
    Posts
    2,305

    Default

    The BRS can work fine in the winter with the copper strip and a natural wind break made from rocks, snow, etc. However if all water is obtained by melting snow it is IMO best to use a JetBoil or other HX pot system that offers much better efficiency for both fuel consumption and speed. The copper strip works with a JB MiniMo.

    Minimo with wind block03.jpg

  2. #42

    Default

    That strip of metal is enough to keep the fuel at an ok temperature?

  3. #43
    Registered User
    Join Date
    03-25-2014
    Location
    Westchester County, NY
    Posts
    2,305

    Default

    Quote Originally Posted by poolskaterx View Post
    That strip of metal is enough to keep the fuel at an ok temperature?
    Yes, down to -21°F at least.

  4. #44

    Default

    Quote Originally Posted by cmoulder View Post
    Yes, down to -21°F at least.
    Wow! That is amazing.

  5. #45
    Registered User
    Join Date
    01-20-2017
    Location
    Saint Johns, FL
    Age
    57
    Posts
    629

    Default

    that heat sink idea..... I wonder at what point it's too hot....too big of a heat sink for the ambient temperature?

  6. #46
    Registered User
    Join Date
    03-25-2014
    Location
    Westchester County, NY
    Posts
    2,305

    Default

    I've done a worst-case scenario (moron) test and they didn't blow up.

    But there's absolutely no reason you should be using it above 40°F ambient.

    The easiest test is the "touch test"..... if the top of the canister is not too hot to touch, you're golden. In actual operation, it has never even approached this temperature for me.

    As with any topper canister stove, don't wrap a windscreen around the stove and canister. Use natural windbreaks (rocks, snow, logs) and there will be no problems.

  7. #47
    Registered User
    Join Date
    10-26-2015
    Location
    Denver Colorado
    Posts
    800

    Default

    Not sure what the patent app shows, but Cmoulder should get a piece of the action.....

  8. #48
    Registered User
    Join Date
    03-25-2014
    Location
    Westchester County, NY
    Posts
    2,305

    Default

    Quote Originally Posted by Hosh View Post
    Not sure what the patent app shows, but Cmoulder should get a piece of the action.....
    Thanks for the thought, but alas, too much prior art!

    It is IMVHO a significant refinement and simplification of the old heat shunt concept that has been around since about 10 minutes after the first Bluet stoves hit the mountains.

    I think the previous assumption was that the shunt needed to wrap around the canister to heat it up, but I found that heat propagated superbly with just the strip.

  9. #49
    Registered User
    Join Date
    01-23-2006
    Location
    Melbourne,Australia
    Age
    68
    Posts
    2,851

    Default

    Maybe obvious but that base under the canister in the cmoulder photo is very important to get the system to work.
    Worked for me with a White Box stove at a few degrees below freesing.

Page 3 of 3 FirstFirst 1 2 3
++ New Posts ++

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •